| DGG1 | Enterprise code |
| 125 | Frame rated current (A) |
| 1P | Number of poles: 1P, 2P, 3P, 4P |
| 40 | Rated current (A) 32, 40, 50, 63, 80, 100, 125 |
Product and installation dimensions(MM)
DGG1-125 should be installed on DIN rail terminal and can be connected to the wire less than 50mm2
Order information
| Product name | DGG1-125 |
| Standards | IEC60947- 3 |
| Certificate | KEMA, CE, SEMKO, CB |
| Electrical characteristics | |
| Number of poles | 1P,2P,3P,4P |
| Rated frequency (Hz) | 50/60 |
| Frame current (A) Inm | 125 |
| Rated current (A) In | 32, 40, 50, 63, 80, 100, 125 |
| Rated voltage (V) Ue | AC230/400(1P,2P) AC400(3P,4P) |
| Rated insulation voltage (V) Ui | 690 |
| Rated impulse withstand voltage (kV) Uimp | 4 |
| Rated short-time withstand current (kA) Icw | 12 Ie / 1s |
| Rated short-circuit making capacity (kA) Icm | 20 Ie / 0.1s |
| Rated making and breaking capacity (kA) Icm | 3 Ie |
| Pollution class | III |
| Mechanical properties | |
| Electrical life | 10000 |
| Mechanical life | 20000 |
| Protection grade | IP20 |
| Indicator window | Contact status indication |
| Normal operation conditions and installation characteristics | |
| Storage temperature | -35℃ ~ +70℃ |
| Installation site altitude | ≤ 2000m |
| Terminals | Fixed with screw |
| Maximum wiring capacity | 50mm2 |
| Maximum limit torque Nm | 3.5 |
| Installation category | Class Ⅱ , Ⅲ |
| Installation method | 35mm standard rail |
| Incoming method | Upper and lower |
| Wiring: Suitable for wire connection of 16mm2 The screws according to the tightening torque 3.5N·m | |
| Rated current (A) | Nominal cross area of copper wire (mm²) |
| 32 | 6 |
| 40-50 | 10 |
| 63 | 16 |
| 80 | 25 |
| 100 | 35 |
| 125 | 50 |
Specializing in manufacturing quality low voltage electricals since 2002
